物流网站免费源码网址搜索域名查询

首先说明：本人由于需要用到Maemo模拟器，初次使用Linux，所以这次的 问题就出在基本使用上

手动安装好Maemo环境后，发现maemo无法运行到模拟器上，由于自己是初次使用Linux，问题就出在自己对命令的使用上。

以下是问题现象说明:

启动Xeohyr后，然后不能继续输入命令行

Pasu@Lan:~$ Xephyr :2 -host-cursor -screen 800x480x16 -dpi 96 -ac -extension Composite
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
unrecognised device identifier!
(EE) config/hal: NewInputDeviceRequest failed
unrecognised device identifier!
(EE) config/hal: NewInputDeviceRequest failed
unrecognised device identifier!
(EE) config/hal: NewInputDeviceRequest failed
unrecognised device identifier!
(EE) config/hal: NewInputDeviceRequest failed

解决办法:

方法一:

Add '&' to the command if you want to be able to use the same terminal to enter commands, etc. The & causes application to be run in the background and you can run other things in the same terminal.

Xephyr :2 -host-cursor -screen 800x480x16 -dpi 96 -ac -extension Composite &

 

方法二:

after running Xephyr, open a new Terminal, run scratchbox and then these commands:

Code:

sb-conf sel FREMANTLE_X86export DISPLAY=:2af-sb-init.sh start

To stop it:

Code:

af-sb-init.sh stop

可以参考 http://talk.maemo.org/showthread.php?t=34529

下面贴上一些Maemo的图：